1, wait for the fire to extinguish naturally (carbon furnace). When the barbecue stove temperature drops to the normal temperature, remove the carbon ash and wipe the barbecue oven. The barbecue basin and the barn net can be cleaned with clean water and clean brush.
2, dry the barbecue with clean dry cloth.
3. Apply a layer of edible oil to the roast net.
4. Put the oven in a ventilated and dry place on the cover of the barbecue.
Maintenance of the usual oven:
1, the barbecue stove should keep clean, do not have barbecue residual food or charcoal ash \ grease.
2. Place the barbecue in a ventilated and dry place.
3, cover the barbecue furnace cover.
4. Do not press heavy objects on a barbecue.
5, the roast net can be smeared with a layer of edible oil to prevent rust.
Before the use of the barbecue furnace:
1, clean the barbecue fire, tighten all the screws. In the course of barbecue, the barbecue furnace will heat and deform. If the installation is not correct and firm, the deformation of the barbecue furnace will be more serious, and it may affect the effect of the barbecue.
2, smear a layer of edible oil on the roast net in order to prevent the material from sticking to the roast net, and it will be easier to clean.
1, for carbon furnace, the component of charcoal should be moderate. If the carbon is too much, it will produce high temperature and high heat, which is not conducive to the operation of the barbecue. In addition, the high temperature and high heat may cause the heating and deformation of the parts of the barbecue fire, and cause the damage of the burning oven. Generally speaking, the area of charcoal should be controlled within 80% of the area of the roast basin, and the height is not more than the height of the roast net.
2. For electric furnaces and gas furnaces, the fire should not be placed in the most upscale position for a long time.
3, the barbecue food must not exceed the normal load of the barbecue furnace and the roast net. Otherwise, it is easy to cause the grill net to fall and cause the deformation and cause the danger easily.
4, do not use process to the charcoal adding liquid or spray accelerant.